Comments

• Yes i did even i created a new rule with IKE2 but it is not working properly and there is no steps how can we transfer the users from IKE1 VPN configuration to IKE2 VPN configuration.

  in IKEv1 to IKEv2 Comment by shwazh January 15
• It was created externally

  in Certificate on port 443 and 4433 Comment by shwazh January 10
• Hi @BWC I have followed all the steps but it is not working.

  in Certificate on port 443 and 4433 Comment by shwazh January 9
• Hi @BWC, Any article or steps for the same?

  in Certificate on port 443 and 4433 Comment by shwazh January 8
• Thanks for the help @BWC On the internal settings page (replace main.html with diag.html in the address bar) I left "Enable TLS compatible mode" unticked and " Disable TLSv1_1" ticked. This worked with a restart.

  in SWEET 32 Vulnerability Comment by shwazh January 7
• Hi @BWC, I have done the same but still the 3DES ciphers is still showing in the nmap output.

  in SWEET 32 Vulnerability Comment by shwazh January 7
• Hi @BWC, We have crossed check this is our output from nmap Also can you share the path through which we can do the following settings. "Enable TLS compatible mode" on the internal settings is not enabled and TLS 1.1 is disabled."

  in SWEET 32 Vulnerability Comment by shwazh January 2
• @BWC Firmware that we have is SonicOS Enhanced 6.5.4.15-116n.

  in SWEET 32 Vulnerability Comment by shwazh January 2